The GeneralAire G-99 Air Filter Gage provides a visual indication of the need to replace the air filters in forced air heating and cooling systems. An easy-to-use, easy-to-read gage to monitor filter media loading so that filter media may be changed when needed. No wiring needed, only a 3/8 drill bit. The gauge is installed between the blower and the filter, where a slight vacuum exists due to the air-flow resistance of the air filter. Air flowing into the gauge, around the calibration screw,lifts a vane in proportion to the negative pressure in the blower compartment. As the air filter loads, the vacuum increases, raising the vane to indicate a filter change is necessary.
The Magnet logo on this page signifies that this product is a factory direct replacement to the OEM branded filter.